-
-
-
- 108 Power Supply Sequencer
Features
---Switch work by the microcomputer control, to achieve a separate sequence of switching power supply and online control work
---After all the power output is connected, you can also use the "one-pass" button, instantly turn off any power output to facilitate a separate treatment of a sudden fault equipment.
---It is convenient when in a multiple machines , as long as the control signal line to connect each one can be connected to the machine after the microcomputer will automatically identify that one is the host, which is a deputy, rather than through the hands. But note: Power switch key of the Timing Power Controller be regarded as vice-machine, must turn to "OFF", otherwise it will cause out of control.
---Provide two independently switchable working light socket (BNC).
---The front is equipped with 2 pcs 1000W channel, not subject to microcomputer control
---5m 4mm2x3 power supply cable
SPECS
Channel: 8 Channel
Power capacity per channel: 220V/10A,2200W/annel
Timing Switch Interval: 1sec
Lighting voltage：AC/12V
Indicator light：Power/Channel on/Bypass
Power：220V/50Hz-60Hz，standard 3-
Wire:Grounded wire is needed
Dim: 483x43x300mm
Weight: 10kg
